Genuine Factory BMW Valve Covers
Valve Cover
Valve Cover
Valve Cover
Valve Cover
Valve Cover
Valve Cover
No results found for "Valve Cover". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
Replacing a Faulty Valve Cover in Your BMW
For drivers of the BMW X5, the valve cover is a complex component that protects the valvetrain while managing crankcase pressures through integrated PCV systems. The upper engine environment is a high-pressure zone where maintaining an airtight seal is vital for both performance and emissions.
Easy Steps to Replace Your Valve Cover
If you're looking to swap out your BMW's valve cover, use the following guidelines:
1. Remove Upper Trim
Remove the engine beauty cover and air intake ducting to gain clear access to the top of the cylinder head.
2. Extract Ignition Coils
Carefully pull the spark plug coils and move the electrical harness aside.
3. Unbolt Mounting Hardware
Loosen the valve cover bolts in a "reverse-torque" pattern to prevent stressing the aluminum cylinder head.
4. Clean the Head Surface
Use a plastic scraper to remove all oil residue from the head.
5. Torque to Specification
Install the new genuine cover and tighten the bolts to the exact inch-pounds dictated by the factory BMW service manual.
Other Key Parts Under the Hood
- Gaskets: Always install a fresh genuine gasket set whenever you are performing a valve cover service.
- Spark Plugs: Replace your plugs while the coils are removed to ensure your engine receives a clean and efficient spark.
- Cylinder Heads: Inspect the top of your head for any sludge or buildup while the valve cover is removed.
Maintain the performance and cleanliness of your BMW with factory-spec sealing solutions. For help with parts selection, reach out to us at BMW Mini Parts Solutions today.